RH50 Series central hole Slip Ring can be used in any electromechanical system that is requiring unlimited, continuous rotation for transmitting power and signal data from a stable structure to rotational structure. With a hole diameter as 50mm, the product can be easyly mounted on a shaft. Also, the fiber brushes do not require lubrication and maintenance,almost no wearing down during it's life time.This type of slip ring uses a bunch of fiber brush technology in the ring and a few of the brushes and rings contact is provided on a point. This ensures long lifetime and uninterrupted transmission.
Options
Cable Length, Mechanical Design, Flange Option, IP Class, Operating Temperature, Cable Output Point, Different Current Values.
Features
Inner Diameter:50mm, Outer Diameter:120 mm The lenght of the slip rings depend on the number of channels. It has maximum 48 channels. It can be combined as 10 amperage and multiples on power circuits. Power and signal channels are used in same connector. Safety can be provided for all combinations. It is convenient to use according to all of the protocols. It has gold contacts, stainless steel body.
Electrical Informations
| Features |
Values |
| |
Power |
Signal |
| Operating Voltage |
380 VAC |
240VAC/VDC |
| Insulation Resistance |
≥1000 M Ω/ 500VDC |
≥500 M Ω/ 500VDC |
| Cable Size |
isolotion PVC or PE |
AWG22 silver coating, PTFE isolation |
| Cable Lenght |
500mm Standard: 500mm |
|
| Dielectric Strength |
500VAC@50Hz,60s |
|
| Electrical Noise |
≤10mΩ |
|
Mechanical Informations
| Features |
Values |
| Operating Speed |
250/500 rpm |
| Operating Temperature |
-20 C ~ +80 C |
| Operating Humidity |
60%RH or more |
| Contact Material |
Precious Metal |
| Frame Material |
Metal |
| Torque |
0.1 N M for -6 version, 0.03N M is added for each 6 Ring |
| Protection Class |
IP51, IP54, IP65 Standard: IP51, Optional: IP54, IP65 |
Standart Product List of RH50 Series